Vijay Raja Mines and Minerals is one of the best manufacturers of M Sand and P Sand. We are the top M Sand Suppliers in Chennai, Chengalpattu and Kanchipuram districts in Tamil Nadu. We are manufacturing high quality M Sand and P Sand by using VSI (Vertical Shaft Impact) technology. Our plant is completely automated with the production capacity of 350 per day.
M-sand: produced by propel machines can be a better substitute to river sand. The sand must be of proper gradation (it should have particles from 150 microns to 4.75 mm in proper proportion).
M-Sand: stands is crushed aggregates produced from hard granite stone which is cubically shaped with grounded edges, washed and graded with consistency to be used as a substitute of river sand. It is a fine aggregate that is produced by crushing stone, gravel, or slag.
When fine particles are in proper proportion, the sand will have fewer voids. The cement quantity required will be less. Such sand will be more economical. Demand for manufactured fine aggregates for making concrete is increasing day by day. It cannot meet the rising demand of construction sector.
The particle shape of the aggregates is very important for making concretes. It is a well known fact that the sand having cubical particles with grounded edges gives higher tensile strength and compression strength to the concrete. The grains should be of durable material and the size of the grains must be such that it should give minimum voids. The presence of clay and slit is avoided since it retards the setting of the cement and making mortar. Experiments shown that considerable variations in strength of mortar may occur owing to form and variety of the sand particle. The strength of mortar may differ by about 50% of average. It is not possible in river sand that all particles should be of higher strength. This can be achieved only by making sand with the help of machines. In machine-made sand, we can use the raw material of higher strength.
The manufactured sand produced by proper machines can be better substitute to river sand.
There is discrepancy in the river sand for two loads lifted from same source. Hence to achieve consistent quality, each truck of sand should be tested. Moreover the sand has to be sieved to remove stones, slit and clay. In routine average wastage of sieving are about 35% and extra labour cost involved. Whereas VR M-Sand is ready-to-use-sand with no wastage since it do not have organic impurities. The superior shape and gradation of VR M-Sand ensures high strength concrete with significant savings in cement.